Uniphos KwikSense

SMART GAS TRANSMITTER

The Uniphos KwikSense Smart Digital Gas Transmitter is a universal gas transmitter capable of detecting a wide range of toxic and flammable gases that may be present in industrial process. The Smart Sensor in the transmitter enable us to swap them between any Sensor Technology. It is a field mounted device which is compatible with all Uniphos Smart Gas Sensors and is suitable for the detection and continuous monitoring of hazardous gas leaks in your working site.

This  groundbreaking Smart Sensor Technology, with Transportable Calibration, allows quick sensor changes with pre-calibrated gas sensors, saving time and money. Also, the non-intrusive calibration allows customer to perform calibration in the hazardous areas without opening the transmitters, thus reducing the downtime of calibration.

CONTACT USREQUEST A FREE DEMONSTRATION

Gas
Detection

Universal
Transmitter

OVERVIEW

Ideal for the following industries:

  • Oil, Gas and Petroleum Industry
  • Petrochemical Industry
  • Chemical Industry
  • Pharmaceutical Industry
  • Marine Industry
  • Fertilizer Industry
  • Nuclear Industry
  • Iron and Steel Industry
HIGHLIGHTS
  • A True Universal Transmitter
  • Industry standard 4-20 mA analog output with Digital communication on MODBUS over RS 485
  • Pre-Calibrated Smart Sensor capable of swapping between any sensor technology
  • Non-Intrusive calibration with magnetic wand
  • Certification – ATEX, IECEX, SIL2 ,InMetro, MED
  • 3 configurable on-board potential free relay contact
  • Temperature Class T4: -20o to +85o Celsius
  • Bright OLED display
SPECS
Sensor technology EC/PEL/NDIR/PID/SS
Operating Voltage 18V to 30 VDC
System Type  Controller based instrument (non intrusive calibration)
Display 8 x 2 OLED Display
Sampling type Diffusion
Sensor Swappable Smart Sensor
LED’s Tri-Colour LED
Alarms Two user settable alarms
Output RS-485 MODBUS/ 4-20mA Current
Relays 3-potential free contacts
Load resistance 600 Ω (max)
Power Consumption < 3 W
Enclosure Flameproof – Cast Alluminium alloy/SS-316
Ingress protection IP66
Dimensions Approx  Diameter 150 mm; Height: 110 mm
Wire configuration 3/4 wires
Interface Calibration & configuration via Non-intrusive magnetic wand
Operating Temperature -20 to 60 ° C
Operating Pressure Ambient + 10 %
Operating Humidity 0-95 %RH (non-condensing)
Cable entries ½” NPT (2 entries)
Certifications ATEX/IECEx + PESO, CMFRI, SIL, MED, InMetro
Weight Cast Aluminium Alloy: 2.5 kg (Approx.)
ACCCESSORIES
  • Flow through adapters
  • Duct Mounting Kit
  • Pipe Mounting Bracket

Similar Products

Back To Top